Low mass, high young's modulus, thermal conductivity, and surface area to volume ratio are mechanical features of refined and CNT. The maximum carrier mobility is seen in CNT and graphene. Because of their increasing thermo-electromechanical characteristics, graphene and carbon nanotubes have been r..
Carbon Nanotubes Doped with 30 wt% Graphene Nanopowder/NanoparticlesGraphene Purity: 99%, Thickness: 5 nm, CNT Purity: >97 wt% Carbon Nano Tubes doped with graphene, one of the promising graphene derivatives, is a hybrid structure composes of a covalently bonded gr..
Carbon Nanotubes Doped with 50 wt% Iron (Fe) Nanopowder/Nanoparticles Technical Properties:
50 wt% Fe Nanopowder/Nanoparticles
Purity
99.99%
Average Particle Size (nm)
800
Specific Surface Area (m2/g)
1..
Please contact us for quotes for larger quantities ! Graphene aerogels are materials which have elasticity and they can easily gain their original form after some compression. In addition, the low density of graphene aerogels enables them to be very absorbent. This material can absorb more..
Please contact us for quotes for larger quantities ! Graphene aerogels are materials which have elasticity and they can easily gain their original form after some compression. In addition, the low density of graphene aerogels enables them to be very absorbent. This material can absorb more..
Carbon Nanotubes-based Conductive Additives for Lithium Ion Battery Technical Properties:Outside Diameter (nm)50.0-80.0 Length (μm)5.0-20.0 Specific Surface Area (m2/g) >55.0 Tap Density (g/cm3)0.20 Adsorption Value&nbs..
Carboxymethyl Cellulose (CMC) Micron Powder for Li-ion Battery Anode Materials This battery-grade Carboxymethyl Cellulose (CMC) Micron Powder for use in Lithium-ion Battery Anode Materials - Whilst preparing the anode of a Li-ion battery, use CMC as an agent to thicken a thickeni..