Aluminum 6061 Alloy Powder, Size: - 325 mesh
- Stock: In Stock
- Brand: Nanographenex
- SKU: GX01AMP0104
£120.00
Available Options
Aluminum 6061 Alloy Powder
Aluminum 6061 Alloy Powder have outstanding characteristics such as good acceptance of applied coatings, relatively high strength, good workability, and high resistance to corrosion.
Size: - 325 mesh
Technical Properties:
| Compound Formula | Al/Mg/Si/Cu/Cr |
| Appearance | Silvery-Gray Powder |
| Melting Point | 482-660 °C |
| Boiling Point | 2519 °C |
| Density | 2.5-2.9 g/cm3 |
| Poisson's Ratio | 0.33 |
| Specific Heat | 0.896 J/g-°C |
| Tensile Strength | 310 MPa (Ultimate) |
| Thermal Conductivity | 167 W/m-K |
| Thermal Expansion | 23.6 µm/m-°C (20-100 °C) |
| Vickers Hardness | 107 |
| Elemental Analysis | Si | Mn | Cr | Zn | Al | Mg | Cu | Ti | Fe |
| 0.4-0.8 | ≤0.15 | 0.04-0.35 | ≤0.25 | Bal | 0.8-1.2 | 0.15-0.40 | ≤0.15 | ≤0.7 |
Applications:
Aluminum 6061 Alloy Powder can be widely utilized in aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors,
decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts; bike frames.
