Titanium Tin Carbide (Ti2SnC) MAX Phase Micron Powder, APS: 325 Mesh, Purity: 99+ %PRODUCT PROPERTIESCompound FormulaTi2SnCMolecular Weight226.45AppearanceDark gray to black powderMelting PointN/ABoiling PointN/ADensity6.24 g/cm3Certificate of Analysis (%)TİCSnOther impurity allowance (%)42.25.352.20.3Ti2SnC ceramics is a new type of structure ceramics with special layer structure which can be machined. It has both the excellent properties of metal and ceramic. Similar to metal, it has the advantages of good electrical and thermal conductivity, machinability, high damage tolerance and thermal shock resistance. Similar to ceramics, it has high modulus of elasticity, high temperature resistance, oxidation resistance and corrosion resistance. Based on the above advantages, Ti2SnC ceramics may be widely used as matrix or reinforcement in aviation, aerospace, weapons and equipment, nuclear industry, electronic information and other high-tech fields. Although Ti2SnC ceramics has excellent comprehensive properties and broad application prospects, the preparation of this material is difficult and the purity is difficult to control, so the application of Ti2SnC ceramics is limited.Ti2SnC ceramics containing FexSny, Sn and TiC were obtained by adopting Fe as sintering assistant agent and hot-pressing element mixing powder at 1150 °C and 50 MPa for 10 h. As described in literature (J. Am. Ceram. Soc. 99, No.7, 2016), Ti, Sn and graphite were used as raw materials and sintered at 1600 °C in a tube furnace with argon atmosphere for 4 h to obtain Ti2SnC ceramics containing Sn and TiC impurities. The preparation method described above has a long sintering time, and the impurities TiC and FexSny generated are difficult to remove, which has a very adverse effect on the properties of Ti2SnC ceramics. Therefore, the preparation of high purity Ti2SnC ceramics is of great significance for the wide application of this material. At present, the preparation of high purity Ti2SnC ceramics has not been reported publicly.