Your Cart

Cathode Materials

Brand: Nanographenex SKU: GX03BE0108
Aluminum Foil for Battery Cathode SubstrateLength: 350 m, Width: 280 mm, Thickness: 15 µm,  EQ-bcaf-15u-280This aluminum foil (15 µm) is used as substrate for coating cathode materials in Li-Ion rechargeable battery research. (Sold per roll only) Technica..
Brand: Nanographenex SKU: GX02BE0115
Aluminum Tab for Pouch Li-ion CellWidth: 4 mm, Length: 57 mmApplications and Description:Aluminum Tab for Pouch Li-ion Cell, with a purity greater than 99.99%, these  Aluminum Tabs are commonly used as the Positive Terminal of pouch Li-ion battery cells.Technical Properties:Purit..
Brand: Nanographenex SKU: GX01BE0101
C-NERGY SUPER C45 Conductive Carbon Black as Conductive Additive for Lithium-Ion Batteries(set: 80 g), EQ-Lib-SuperC45Applications and Key Benefits:The main use of our C-NERGY SUPER C45 Conductive Carbon Black is to provide electrical conductivity to the electrodes of lithiu..
Brand: Nanographenex SKU: GX01BE0102
C-NERGY SUPER C65 Conductive Carbon BlackKey Benefits:C-NERGY SUPER C65 Conductive Carbon Black - With the unique combination of high structure and low surface area, this highly graphitic conductive additive for Lithium-Ion Batteries guarantees both remarkable system stability and distribution&..
Brand: Nanographenex SKU: GX01BE0103
C-NERGY Super PLi Conductive Carbon Black1 bag: 40 g.  Applications and Description :C-NERGY Super P Conductive Carbon Black is put to use in commercial applications given its lower rejection ratio and improved power density,. Our conductive carbon blacks have been used as black ..
Brand: Nanographenex SKU: GX04BEC0103
Product Specification Item Specification Product Name Carbon-Coated Aluminum Foil Substrate Aluminum Foil Substrate Thickness 20μm Foil Substrate Width 210±0.5mm Foil Substrate Length 297±0.5mm Coating Agent..
Brand: Nanographenex SKU: GX02BE0116
Conductive Acetylene Black for Li-ion Battery Anode/Cathode Particle Size: 35~40 nmTechnical Properties:Apparent Specific Volume16~17 ml/gIodine Absorption Number≥90 g/kgHydrochloric Acid Absorption Number≥4.4 ml/gResistivity≤1.8 Ω/mpH Value6~8Heating Loss≤0.2%Ash Content≤0.2%Grid Content ..
Brand: Nanographenex SKU: GX02BE0135
Electrolyte Lithium Hexafluorophosphate (LiPF6) for Lithium-ion Battery Research Development1 Kg in Stainless Steel ContainerElectrolyte Lithium Hexafluorophosphate (LiPF6) for Lithium-ion Battery Research Development. This inorganic, white, crystalline powder is sealed and delivered to you in ..
SKU: GX04BEC0105
Product Information Product Name Lithium Carbonate (Battery Grade, Li2CO3 ) Purity ≥99.995% Product No NG10BEW0923 Appearance White monoclinic crystal Solubility in Water Slightly soluble in water Solubility in Acid So..
Brand: Nanographenex SKU: GX02BE0130
Lithium Cobalt Oxide (LiCoO2) Powder for Li-ion Battery Cathode ApplicationLithium Cobalt Oxide (LiCoO2) Powder  is most commonly used as the cathode material in rechargeable Li-ion batteries found in day-to-day consumer electronics. This is because Li-Ion batteries manufact..
SKU: GX04BEC0101
Product Information Product Name Lithium hydroxide monohydrate (trace metals basis, LiOH.H2O) Purity 99.99% Product No NG10BEW0929 Formula Weight 41.96 Solubility Soluble in water Solubility Slightly soluble in alcoh..
Brand: Nanographenex SKU: GX04BEC0102
Product Information Product Name Lithium Hydroxide, Monohydrate (Battery Grade, LiOH.H2O) Purity ≥ 99.0% Product No GX04BEC0102 Formula Weight 41.96 Solubility Soluble in water Solubility ..
Brand: Nanographenex SKU: GX01BE0107
Lithium Iron Phosphate (LiFePO4) Powder for Li-ion Battery Cathode ApplicationOur high-quality Lithium Iron Phosphate (LiFePO4) Powder, also known as LFP is a cathode material used in the fabrication of lithium-ion batteries. Primary applications include, but are not limited to, ..
Brand: Nanographenex SKU: GX02BE0129
Lithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder for High Power Li-ion Battery Cathode Application(Ni:Co:Mn=5:2:3) This high-qualityLithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder can be used as an active cathode material and so is primarily used for the m..
Brand: Nanographenex SKU: GX02BE0104
N-Methyl-2-Pyrrolidone (NMP) Solvent for Lithium Battery Cathode MaterialsPurity: 99.90% Technical Properties: Purity 99.90% Appearance Colorless Transparent Liquid Molar Mass 99.13 g/mol Melting Point -24 ℃ Boiling Point 202 °C (1013 hPa) Density 1..
Brand: Nanographenex SKU: GX01BE0109
Nickel Foam for Battery Cathode SubstrateLength: 1 m, Width: 300 mm, Thickness: 1.6 mm, EQ-bcnf-16m Technical Properties:MaterialNickel FoamPurity> 99.99% (excellent anti-corrosive)Length1 mWidth300 mmThickness1.6 mmNet Weight104 gSurface Density346 g/m^2Porosity≥95% &nbs..
Brand: Nanographenex SKU: GX02BE0104
Platinum Foil, Purity 99.95%, Thickness: 1mm, 1x1 cm Applications:With a purity greater than 99.95%, our high-quality Platinum Foil is available in various widths and thicknesses (please contact us for custom requirements).   This material holds great potential due..
Brand: Nanographenex SKU: GX01BE0110
PVDF Binder for Li-ion Battery ElectrodesPurity: ≥99.5 %, set: 80 g  Popular for use in the manufacture of lithium-ion batteries, our high-quality PVDF Binder will hold the active material particles together and in contact with the current colle..
Showing 1 to 19 of 19 (1 Pages)