It is a leapfrog technology for the electrification of the drivetrain. This technology is already being used in consumer electronics and power tools. It consists of the metallic Lithium anode and circuit cathode. Its main advantages include its replacement by sulfur, lightweight and inexpensive status. Materials include lithium metal oxides, olivines (like LiFePO4), vanadium oxides, and rechargeable lithium oxides. Electrolyte fills the spaces which are based on lithium ions carrying the charge from cathode to anode. The electrolytes of lithium batteries include polymer, solid-state or liquid electrolytes. A foam separator is used if the electrolyte is a liquid.
Brand: Nanographenex SKU: GX03BE0108
Aluminum Foil for Battery Cathode SubstrateLength: 350 m, Width: 280 mm, Thickness: 15 µm, EQ-bcaf-15u-280This aluminum foil (15 µm) is used as substrate for coating cathode materials in Li-Ion rechargeable battery research. (Sold per roll only) Technica..
£303.84
Brand: Nanographenex SKU: GX02BE0113
Aluminum Laminated Film for Pouch Cell Case Thickness: 113 μm, Width: 400 mm, Length: 10 m.Technical Properties:Layers from outside (Shiny) to inside (Mat) Polyamide (JIS Z1714): &..
£429.12
Brand: Nanographenex SKU: GX03BE0109
Aluminum Laminated Film for Pouch Cell CaseWidth: 400 mm, Length: 7.5 m - EQ-alf-400-7.5MThis aluminum laminated film (115 µm) is used as casing material for polymer Li-Ion battery. Technical Properties: Polyamide (JIS Z1714)0.025 mm (+-0.0025 mm)Adhesive..
£341.28
Brand: Nanographenex SKU: GX02BE0115
Aluminum Tab for Pouch Li-ion CellWidth: 4 mm, Length: 57 mmApplications and Description:Aluminum Tab for Pouch Li-ion Cell, with a purity greater than 99.99%, these Aluminum Tabs are commonly used as the Positive Terminal of pouch Li-ion battery cells.Technical Properties:Purit..
£187.20
Brand: Nanographenex SKU: GX01GPN0101
Boron Doped GrapheneBoron-doped Graphene (BG) is a novel nanomaterial based on graphene, a single sheet of carbon atoms in a hexagonal lattice. The addition of boron atom impurities into pure graphene increases the activation region on its surface, enhances its catalytic ability, accelerates redox r..
£282.24
Hot
Brand: Nanographenex SKU: GX01BE0101
C-NERGY SUPER C45 Conductive Carbon Black as Conductive Additive for Lithium-Ion Batteries(set: 80 g), EQ-Lib-SuperC45Applications and Key Benefits:The main use of our C-NERGY SUPER C45 Conductive Carbon Black is to provide electrical conductivity to the electrodes of lithiu..
£64.80
Hot
Brand: Nanographenex SKU: GX01BE0102
C-NERGY SUPER C65 Conductive Carbon BlackKey Benefits:C-NERGY SUPER C65 Conductive Carbon Black - With the unique combination of high structure and low surface area, this highly graphitic conductive additive for Lithium-Ion Batteries guarantees both remarkable system stability and distribution&..
£112.32
Brand: Nanographenex SKU: GX01BE0103
C-NERGY Super PLi Conductive Carbon Black1 bag: 40 g. Applications and Description :C-NERGY Super P Conductive Carbon Black is put to use in commercial applications given its lower rejection ratio and improved power density,. Our conductive carbon blacks have been used as black ..
£93.60
Brand: Nanographenex SKU: GX04BEC0103
Product Specification Item Specification Product Name Carbon-Coated Aluminum Foil Substrate Aluminum Foil Substrate Thickness 20μm Foil Substrate Width 210±0.5mm Foil Substrate Length 297±0.5mm Coating Agent..
£230.40
Hot
Brand: Nanographenex SKU: GX01NCP0101
Carboxymethyl Cellulose (CMC) Micron Powder for Li-ion Battery Anode Materials This battery-grade Carboxymethyl Cellulose (CMC) Micron Powder for use in Lithium-ion Battery Anode Materials - Whilst preparing the anode of a Li-ion battery, use CMC as an agent to thicken a thickeni..
£72.00
Brand: Nanographenex SKU: GX02BE0116
Conductive Acetylene Black for Li-ion Battery Anode/Cathode Particle Size: 35~40 nmTechnical Properties:Apparent Specific Volume16~17 ml/gIodine Absorption Number≥90 g/kgHydrochloric Acid Absorption Number≥4.4 ml/gResistivity≤1.8 Ω/mpH Value6~8Heating Loss≤0.2%Ash Content≤0.2%Grid Content ..
£90.72
Brand: Nanographenex SKU: GX01BE0104
Conductive Graphite Powder for Lithium BatteryPurity: 99.9+%, Size: 1-5 µmTechnical Properties: Fixed Carbon (%)≥99.98Granularity (µm)1~5Moisture Content (%)≤0.08Ash Content≤0.01PH7Fe≤5S≤0.01Si≤1Cl≤0.1F≤1Al≤1Cu≤1Cr≤1Applications: This Conductive Graphite Powder for..
£57.60
Brand: Nanographenex SKU: GX02BE0135
Electrolyte Lithium Hexafluorophosphate (LiPF6) for Lithium-ion Battery Research Development1 Kg in Stainless Steel ContainerElectrolyte Lithium Hexafluorophosphate (LiPF6) for Lithium-ion Battery Research Development. This inorganic, white, crystalline powder is sealed and delivered to you in ..
£671.04
Brand: Nanographenex SKU: GX02BE0101
Graphite Fluoride (Carbon Monofluoride) Micron Powder for Li-ion Battery, 10-20 micron, F/C Ratio: 0.8-1.0Also known as polycarbon monofluoride, polycarbon fluoride and carbon monofluoride, our Graphite Fluoride (Carbon Monofluoride) Micron Powder for Li-ion Battery, 10-20 mic..
£82.08
Brand: Nanographenex SKU: GX03BE0131
High Capacity and High Purity Graphite Micron Powder for Li-ion Battery Technical Properties: Fixed carbon (%) ≥99.995 Moisture content (%) 0.033% Capacity 350.14 mAh/g SSA 1.480 m2/g Tap 0.978 g/cm..
£57.60
Brand: Nanographenex SKU: GX02BE0112
High Temperature Polyimide Tape for Lithium BatteryWidth: 10 mm Technical Properties:BackingPI FilmAdhesiveSiliconeTotal Thickness(mm)0.035ColorAmber (N/25 mm)Peel Adhesion5（N/25 mm)Tensile strength50Heat Resistance (℃)-40 ≈+150Breakdown Voltage (KV)5Unwind ForceMediumWidt..
£60.48
Brand: Nanographenex SKU: GX02BE0111
High Temperature Teflon Tape for Lithium Battery Width: 19 mm, Thickness: 0.13 mm, Length: 10 mTechnical Properties:Width19 mmThickness0.13 mmLength10 m1. Low temperature of minus 196°C high temperature of 360°C2. Strong corrosion resistance (applicable temperature range)3. The surface is ..
£72.00
Brand: Nanographenex SKU: GX02BE0132
High-Performance Copper Foil Rolls for Lithium Ion BatterySize: 10 µm, 1 Roll: 2500 grams Applications and Description:Our High-Performance Copper Foil Rolls for Lithium Ion Batteries act as a pathway for electric currents and as a means of emitting heat generated by batter..
£570.24
Brand: Nanographenex SKU: GX02BE0131
High-Performance Copper Foil Rolls for Lithium Ion BatterySize: 25 µm, 1 Roll: 2500 gramsTechnical Properties: Width 200 mm Length 131 meters Thickness 25 µm Areal Density 190-200 g/m2 Purity (%) More..
£627.84
Brand: Nanographenex SKU: GX03BE0105
Li-Ion Battery Separator FilmLength: 800 m, Width: 85 mm, Thickness: 25 μmOne of the most critically important cell components to guarantee cell safety is li-ion batteryseparator, a kind of microporous membrane that physically separates the anode and cathodeto prevent&n..
£642.24
Brand: Nanographenex SKU: GX02BE0110
Lithium Battery Strapping TapeWidth: 10 mm, Thickness: 0.03 mm, Length: 100 mTechnical Properties:BackingPET AdhesiveAcrylicTotal Thickness (mm)0.030 ColorClear/BlackPeel Adhesion（N/25mm) 1.5-2.5Tensile Strength（N/25mm) 50Breakdown Voltage（KV）3.5Unwind ForceLightWidth (mm)10..
£148.32
SKU: GX04BEC0105
Product Information Product Name Lithium Carbonate (Battery Grade, Li2CO3 ) Purity ≥99.995% Product No NG10BEW0923 Appearance White monoclinic crystal Solubility in Water Slightly soluble in water Solubility in Acid So..
£42.00
Brand: Nanographenex SKU: GX02BE0130
Lithium Cobalt Oxide (LiCoO2) Powder for Li-ion Battery Cathode ApplicationLithium Cobalt Oxide (LiCoO2) Powder is most commonly used as the cathode material in rechargeable Li-ion batteries found in day-to-day consumer electronics. This is because Li-Ion batteries manufact..
£102.24
SKU: GX04BEC0101
Product Information Product Name Lithium hydroxide monohydrate (trace metals basis, LiOH.H2O) Purity 99.99% Product No NG10BEW0929 Formula Weight 41.96 Solubility Soluble in water Solubility Slightly soluble in alcoh..
£48.00
Brand: Nanographenex SKU: GX04BEC0102
Product Information Product Name Lithium Hydroxide, Monohydrate (Battery Grade, LiOH.H2O) Purity ≥ 99.0% Product No GX04BEC0102 Formula Weight 41.96 Solubility Soluble in water Solubility ..
£25.92
Brand: Nanographenex SKU: GX01BE0107
Lithium Iron Phosphate (LiFePO4) Powder for Li-ion Battery Cathode ApplicationOur high-quality Lithium Iron Phosphate (LiFePO4) Powder, also known as LFP is a cathode material used in the fabrication of lithium-ion batteries. Primary applications include, but are not limited to, ..
£86.40
Brand: Nanographenex SKU: GX02BE0129
Lithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder for High Power Li-ion Battery Cathode Application(Ni:Co:Mn=5:2:3) This high-qualityLithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder can be used as an active cathode material and so is primarily used for the m..
£73.44
Brand: Nanographenex SKU: GX03BE0102
Lithium Titanium Oxide (Li4Ti5O12) Micron Powder for Li-ion Battery Anode (LTO)Purity: 99+%, White, Tap Density: ≥0.92 g/cm2 Our Lithium Titanium Oxide (Li4Ti5O12) Micron Powder has a purity of greater than 99% and can be used in place of graphite within anodes of aver..
£43.20
