As lithium-ion batteries are based on
leapfrog technology, therefore stationary storage solutions include the use of
renewable energy sources. This technology is already being used in low power
applications for which Lithium-ion batteries are used. Its main advantages
include its replacement by sulfur, lightweight and inexpensive status. The raw
materials for lithium-ion batteries include cobalt, graphite, lithium, and
manganese etc. With the increase in electric vehicle deployment, LIB cell
production is becoming important.
Hot
Brand: Nanographenex
SKU: GX01BE0101
C-NERGY SUPER C45 Conductive Carbon Black as Conductive Additive for Lithium-Ion Batteries(set: 80 g), EQ-Lib-SuperC45Applications and Key Benefits:The main use of our C-NERGY SUPER C45 Conductive Carbon Black is to provide electrical conductivity to the electrodes of lithiu..
£64.80
Hot
Brand: Nanographenex
SKU: GX01BE0102
C-NERGY SUPER C65 Conductive Carbon BlackKey Benefits:C-NERGY SUPER C65 Conductive Carbon Black - With the unique combination of high structure and low surface area, this highly graphitic conductive additive for Lithium-Ion Batteries guarantees both remarkable system stability and distribution&..
£112.32
Brand: Nanographenex
SKU: GX01BE0103
C-NERGY Super PLi Conductive Carbon Black1 bag: 40 g. Applications and Description :C-NERGY Super P Conductive Carbon Black is put to use in commercial applications given its lower rejection ratio and improved power density,. Our conductive carbon blacks have been used as black ..
£93.60
Brand: Nanographenex
SKU: GX02BE0116
Conductive Acetylene Black for Li-ion Battery Anode/Cathode Particle Size: 35~40 nmTechnical Properties:Apparent Specific Volume16~17 ml/gIodine Absorption Number≥90 g/kgHydrochloric Acid Absorption Number≥4.4 ml/gResistivity≤1.8 Ω/mpH Value6~8Heating Loss≤0.2%Ash Content≤0.2%Grid Content ..
£90.72
Brand: Nanographenex
SKU: GX01BE0104
Conductive Graphite Powder for Lithium BatteryPurity: 99.9+%, Size: 1-5 µmTechnical Properties: Fixed Carbon (%)≥99.98Granularity (µm)1~5Moisture Content (%)≤0.08Ash Content≤0.01PH7Fe≤5S≤0.01Si≤1Cl≤0.1F≤1Al≤1Cu≤1Cr≤1Applications: This Conductive Graphite Powder for..
£57.60
Brand: Nanographenex
SKU: GX01GP0101
The structure of graphene nanoplatelets is best described as steps of parallel sheets of hexagonal carbon atoms. They agglomerate quickly due to Van der Waals forces generally 5 to twenty layers thick. Graphene nanoplatelets of various diameters up to 50 microns with an average thickness of 5 to 10 ..
£10.08
Brand: Nanographenex
SKU: GX01GP0115
The structure of graphene nanoplatelets is best described as steps of parallel sheets of hexagonal carbon atoms. They agglomerate quickly due to Van der Waals forces generally 5 to twenty layers thick. Graphene nanoplatelets of various diameters up to 50 microns with an average thickness of 5 to 10 ..
£10.80
Hot
Brand: Nanographenex
SKU: GX01GP0117
The structure of graphene nanoplatelets is best described as steps of parallel sheets of hexagonal carbon atoms. They agglomerate quickly due to Van der Waals forces generally 5 to twenty layers thick. Graphene nanoplatelets of various diameters up to 50 microns with an average thickness of 5 to 10 ..
£13.68
Brand: Nanographenex
SKU: GX03BE0131
High Capacity and High Purity Graphite Micron Powder for Li-ion Battery
Technical Properties: Fixed carbon (%)≥99.995Moisture content (%)0.033%Capacity350.14 mAh/gSSA1.480 m2/gTap0.978 g/cm..
£57.60
Brand: Nanographenex
SKU: GX02BE0114
Li-Ion Battery Separator FilmThickness: 25 μm, Width: 60 mm, Length: 500 m, 1 Roll: 500 mTechnical Properties:MaterialPolypropylene (PP)Porosity42±3 % Thickness25±2 μmWidth60 mmAreal density13.2±1.0 g/m2Air Permeability350±100 s/100mlPuncture Strength≥400 gTensile Stren..
£348.00
Brand: Nanographenex
SKU: GX02BE0130
Lithium Cobalt Oxide (LiCoO2) Powder for Li-ion Battery Cathode ApplicationLithium Cobalt Oxide (LiCoO2) Powder is most commonly used as the cathode material in rechargeable Li-ion batteries found in day-to-day consumer electronics. This is because Li-Ion batteries manufact..
£102.24
Hot
Brand: Nanographenex
SKU: GX01BE0107
Lithium Iron Phosphate (LiFePO4) Powder for Li-ion Battery Cathode ApplicationOur high-quality Lithium Iron Phosphate (LiFePO4) Powder, also known as LFP is a cathode material used in the fabrication of lithium-ion batteries. Primary applications include, but are not limited to, ..
£86.40
Brand: Nanographenex
SKU: GX02BE0129
Lithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder for High Power Li-ion Battery Cathode Application(Ni:Co:Mn=5:2:3) This high-qualityLithium Nickel Manganese Cobalt Oxide (LiNiCoMnO2) Powder can be used as an active cathode material and so is primarily used for the m..
£73.44
Brand: Nanographenex
SKU: GX03BE0102
Lithium Titanium Oxide (Li4Ti5O12) Micron Powder for Li-ion Battery Anode (LTO)Purity: 99+%, White, Tap Density: ≥0.92 g/cm2 Our Lithium Titanium Oxide (Li4Ti5O12) Micron Powder has a purity of greater than 99% and can be used in place of graphite within anodes of aver..
£43.20
Brand: Nanographenex
SKU: GX02BE0104
N-Methyl-2-Pyrrolidone (NMP) Solvent for Lithium Battery Cathode MaterialsPurity: 99.90% Technical Properties:Purity
99.90%Appearance
Colorless Transparent LiquidMolar Mass
99.13 g/molMelting Point
-24 ℃Boiling Point
202 °C (1013 hPa)Density
1..
£141.12
Brand: Nanographenex
SKU: GX01BE0110
PVDF Binder for Li-ion Battery ElectrodesPurity: ≥99.5 %, set: 80 g Popular for use in the manufacture of lithium-ion batteries, our high-quality PVDF Binder will hold the active material particles together and in contact with the current colle..
£532.80
Showing 1 to 17 of 17 (1 Pages)