It is a leapfrog technology for the
electrification of the drivetrain. This technology is already being used in
consumer electronics and power tools. It consists of the metallic Lithium anode
and circuit cathode. Its main advantages include its replacement by sulfur, lightweight
and inexpensive status. Materials include lithium metal oxides, olivines (like
LiFePO4), vanadium oxides, and rechargeable lithium oxides.
Electrolyte fills the spaces which are based on lithium ions carrying the
charge from cathode to anode. The electrolytes of lithium batteries include
polymer, solid-state or liquid electrolytes. A foam separator is used if the
electrolyte is a liquid.
Brand: Nanographenex
SKU: GX03BE0101
Mesocarbon Microbeads (MCMB) Graphite Micron Powder for Lithium Ion BatterySSA: 1.539 m2/g, Black PowderMCMB (mesocarbon microbeads) synthetic graphite is prepared from petroleum pitch or coal tar. MCMB is one of the promising carbon anode materials for Li-ion batteries.MCMB has high speci..
£243.36
Brand: Nanographenex
SKU: GX02BE0104
N-Methyl-2-Pyrrolidone (NMP) Solvent for Lithium Battery Cathode MaterialsPurity: 99.90% Technical Properties:Purity
99.90%Appearance
Colorless Transparent LiquidMolar Mass
99.13 g/molMelting Point
-24 ℃Boiling Point
202 °C (1013 hPa)Density
1..
£141.12
Hot
Brand: Nanographenex
SKU: GX01BE0109
Nickel Foam for Battery Cathode SubstrateLength: 1 m, Width: 300 mm, Thickness: 1.6 mm, EQ-bcnf-16m Technical Properties:MaterialNickel FoamPurity> 99.99% (excellent anti-corrosive)Length1 mWidth300 mmThickness1.6 mmNet Weight104 gSurface Density346 g/m^2Porosity≥95% &nbs..
£208.80
Brand: Nanographenex
SKU: GX03BE0110
Nickel Tab with Adhesive Polymer Tape as Negative Terminal for Pouch CellWidth: 4 mm Technical Properties: MaterialNickel 99.99%, Adhesive Polymer Tape on the tab allows for immediate hot sealingLength57 mmWidth4 mmThickness0.09 mmMax. Loading Current3ANet Weight160 mg/pcsApplica..
£341.28
Brand: Nanographenex
SKU: GX03BE0104
Nickel TabsWidth: 3 mm Technical Properties: MaterialNickel 99.99%, Adhesive Polymer Tape on the tab allows for immediate hot sealingLength50 mmWidth3 mmThickness0.09 mmMax. Loading Current3ANet Weight128 mg/pcsApplication1. Connect to cathode current collector as polymer ..
£56.16
Brand: Nanographenex
SKU: GX02BE0133
Polytetrafluoroethylene (PTFE) Condensed Liquid Binder for Li-ion BatteryThis Polytetrafluoroethylene (PTFE) Condensed Liquid Binder is considered. environmentally friendly. For use in lithium-ion batteries, it demonstrates superb chemical stability which is extremely important in order to..
£67.68
Brand: Nanographenex
SKU: GX01BE0110
PVDF Binder for Li-ion Battery ElectrodesPurity: ≥99.5 %, set: 80 g Popular for use in the manufacture of lithium-ion batteries, our high-quality PVDF Binder will hold the active material particles together and in contact with the current colle..
£532.80
Brand: Nanographenex
SKU: GX01BE0111
Styrene-Butadiene Rubber (SBR) Binder for Li-ion Battery Anode MaterialsWater-soluble, PH: 6-7, Relative Density: 1.52 A water-based binder, Styrene-Butadiene Rubber (SBR) is used in the preparation of Lithium-ion anode electrodes as well as cathode slurries. It has a milky..
£172.80